The high-speed polishing machine can be used for cleaning, fine grinding, polishing and other functions, and has a wide range of applications, such as marble, terrazzo, granite, epoxy floors, etc. It can be said that it is a one-stop solution to various floor polishing problems. Next, we mainly introduce the operation instructions about it:
1. Take the machine out of the box and lay it flat on the ground.
2. After the chassis is lifted, the chassis is exposed. Use resin sanding pads or ordinary sanding pads according to the ground conditions, and install the sanding pads on the large plate.
3. Lay the machine flat, plug in the power supply, turn the switch to start the machine, and then adjust to the required speed, and then it can run normally.
4. After the machine is started, you can choose an appropriate speed to advance at a constant speed according to the ground strength and processing effect.
5. During operation, if there is any abnormal phenomenon, please stop the machine immediately, and it can be reused after inspection.
The operation instructions of the high-speed polishing machine introduced above are briefly understood.